saya gunakan Hp Samsung SGH-Z170 yang sudah mendukung 3G Hp ini termasuk murah cuma 1jt dan Kartu IM2 Broom yang sudah mendukung 3G
Buka terminal Caranya Application-Accessories-Terminal
Jalankan perintah
$ sudo wvdialconf
Editing `/etc/wvdial.conf’.
Scanning your serial ports for a modem.
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 Z — OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 — OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 — OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyACM0<*1>: Modem Identifier: ATI — Manufacturer: SAMSUNG ELECTRONICS CORPORATION
ttyACM0<*1>: Speed 9600: AT — OK
ttyACM0<*1>: Speed 19200: AT — OK
ttyACM0<*1>: Speed 38400: AT — OK
ttyACM0<*1>: Speed 57600: AT — OK
ttyACM0<*1>: Speed 115200: AT — OK
ttyACM0<*1>: Speed 230400: AT — OK
ttyACM0<*1>: Speed 460800: AT — OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
Found an USB modem on /dev/ttyACM0.
Modem configuration written to /etc/wvdial.conf.
ttyACM0
akan terlihat bahwa usb divice anda akan termount kali ini Hp samsung saya termount di /dev/ttyACM0
Tambahkan parameter settingan pada wvdial.conf
caranya
$sudo vim /etc/wvdial.conf
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Modem Analog
ISDN = 0
APN = indosatm2
Phone = *99#
Modem = /dev/modem
Username = (username anda)
Password = (passwd anda)
Baud = 460800
Kemudian buat link
$sudo ln -s /dev/ttyACM0 /dev/modem
Kemudian jalankan perintah wvdial untuk connect i nternet
$ wvdial
–> WvDial: Internet dialer version 1.60
–> Cannot get information for serial port.
–> Initializing modem.
–> Sending: ATZ
ATZ
OK
–> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
–> Modem initialized.
–> Sending: ATDT*99#
–> Waiting for carrier.
ATDT*99#
CONNECT
–> Carrier detected. Waiting for prompt.
–> Don’t know what to do! Starting pppd and hoping for the best.
–> Starting pppd at Sat Feb 21 08:44:53 2009
–> Pid of pppd: 29314
–> Using interface ppp0
–> pppd: ��[06][08]
–> pppd: ��[06][08]
–> pppd: ��[06][08]
–> pppd: ��[06][08]
–> pppd: ��[06][08]
–> pppd: ��[06][08]
–> pppd: ��[06][08]
–> local IP address 114.58.xxx.xx
–> pppd: ��[06][08]
–> remote IP address 10.64.xxx.xxx
–> pppd: ��[06][08]
–> primary DNS address 202.155.xxx.xxx
–> pppd: ��[06][08]
–> secondary DNS address 202.155.xxx.xxx
Mudah bukan
Selamat mencoba
